You can download a complete tune cycle example and follow along with the following video. The goal is to start off with the supplied base tune, complete each simulated recording log cycles, make corrections starting with the base tune. When the 7th cycle is completed you can compare your version 7 tune with my supplied example version 7 tune and if they match, you have successfully completed this first tutorial!
Here is the example folder to download to your computer. It is large, so it will take a minute or two to download. Just save it to a good location on your computer so you can open the files with Power Core's C3 and Data Center modules. You will also need the VE/IPW Comp equation found here if you have not downloaded it already.
Here is the video that demonstrates by going through the complete tutorial with the final versions compared to show they are identical. It is about 16 minutes long, I encourage you to go through this exercise to gain confidence in your tune corrections.
Tutorial Example
If you do not get the same results as the provided version 7, just start over. If they are slightly off, check to make sure your Power Core Application Launcher Option settings for the Pressure channel is set to kPa and not Inches of Mercury.