Firmware Update for the PV3

Dynojet is continuously improving their firmware and software.  Before you start this journey of tuning, you should always make sure your PV3 (and Power Core Software Suite) is up-to-date.

The Dynojet Power Vision 3 (PV3) is very easy to update its firmware.  I made the following video that shows how to update the firmware as well as tune and log management.  Please ignore the portion of the video that discusses FuelmotoUSA sending out PV3 firmware as I no longer contract to do their Indian support.
 
Once you initiate a recording by pressing the button with a circle on it, the unit will continue to record until you stop it by pressing the button again or it fills memory (which can be a very long recording session).  The PV3 will automatically close the log around the 30 minute mark and then open a new log.  Before you turn your engine off, you do want to manually stop the recording or the last log file will be lost.

If you are recording a long ride, then the PV3 will split the logs up into multiple files with the label of the tune.djt that is send it the data as well as a number.  So it will look like V1-CB_LOG_1.wp8, V1-CB_LOG_2.wp8, etc.  The tune.djt file being V1-CB.djt in this example.  No wondering which tune recorded which set of logs!

Here is a brief video showing the updating process and other file management concepts.

Dynojet has made numerous improvements to the PV3 with regards to file management, stability, and logs.  If you have not updated your firmware lately, please do so.  Here is a direct link to the newest firmware.